pl-nk v0.4.5
Plonk|Plink|Plank are a set of cross-platform C/C++ frameworks for audio software development
|
Notch filter (i.e, parametric mid-EQ). More...
Static Public Member Functions | |
static UnitType | ar (UnitType const &input, UnitType const &frequency=SampleType(1200), UnitType const &q=SampleType(1), UnitType const &gain=SampleType(0), UnitType const &mul=SampleType(1), UnitType const &add=SampleType(0), BlockSize const &preferredBlockSize=BlockSize::noPreference(), SampleRate const &preferredSampleRate=SampleRate::noPreference()) throw () |
Create a notch filter. | |
static UnitType | kr (UnitType const &input, UnitType const &frequency=SampleType(1200), UnitType const &q=SampleType(1), UnitType const &gain=SampleType(0), UnitType const &mul=SampleType(1), UnitType const &add=SampleType(0)) throw () |
Create a control rate notch filter. |
Notch filter (i.e, parametric mid-EQ).
static UnitType NotchUnit< SampleType, InterpTypeCode >::ar | ( | UnitType const & | input, |
UnitType const & | frequency = SampleType (1200) , |
||
UnitType const & | q = SampleType (1) , |
||
UnitType const & | gain = SampleType (0) , |
||
UnitType const & | mul = SampleType (1) , |
||
UnitType const & | add = SampleType (0) , |
||
BlockSize const & | preferredBlockSize = BlockSize::noPreference() , |
||
SampleRate const & | preferredSampleRate = SampleRate::noPreference() |
||
) | throw () [inline, static] |
Create a notch filter.
input | The input signal to filter. |
frequency | The centre frequency. |
q | The Q factor. |
gain | The boost/cut gain in dB. |
mul | An optional multiplier. |
add | An optional offset. |
preferredBlockSize | (Optional) The preferred block size for the process. |
preferredSampleRate | (Optional) The preferred sample rate for the process. |
static UnitType NotchUnit< SampleType, InterpTypeCode >::kr | ( | UnitType const & | input, |
UnitType const & | frequency = SampleType (1200) , |
||
UnitType const & | q = SampleType (1) , |
||
UnitType const & | gain = SampleType (0) , |
||
UnitType const & | mul = SampleType (1) , |
||
UnitType const & | add = SampleType (0) |
||
) | throw () [inline, static] |
Create a control rate notch filter.
input | The input signal to filter. |
frequency | The centre frequency. |
q | The Q factor. |
gain | The boost/cut gain in dB. |
mul | An optional multiplier. |
add | An optional offset. |